4.7mm Bullet Terminals (GB)
This terminals are used - or have I to say were used - in most of the british cars from the 40ies until the 80ies.This means in nearly all of our cherished cars.
But please don't get mixed up with the connectors which are used in most japanese cars nowadays.
!
EBTCRnn
Ms:0.65...2qmm Sn:3qmm

Bullet Terminal for crimping and/or soldering

With the use of the proper crimping tool this terminal gives the original finish for Your wiring loom.
This terminals can be used for wires with the given cross section and fits to the connectors shown on this page here.
Of course these terminals also can be soldered. A simple soldering iron of app.30W wlill do the job.
The brass items are known as GHF2200 in the Unipart-system.
EBCM
Weight: g
ground connector

Bullet Connector Ground connection

Ground connection which is used in most of british cars like MG, Triumph, Jaguar, Morris Minor, Land Rover, ...
This ground connector is identical to its original pattern but made of rust resistand material (EN steel number 1.4301, SAE grade 304) in Austria from a certified specialist.
fixing hole diameter 6,5mm (for a 1/4'' screw)
These clips are also known under the following part numbers:
  • 236366A, 236366 (Unipart)
  • LU860019 (Lucas)
  • 102137
EBC1
Weight: g
BulletConnector Single

Bullet Connector Single

Connects two wires with the same electrical potential
This connector is used to connect some el. Equipment to the wiring loom or just lenthen the cables.
An example can be found in the section gearbox switch or even to connect the indicator lamps to the wiring loom.
This item is known under the following partnumbers:
  • 104618 (MGA, MGB, TR-all, Morris, Mini, and all BL-derivates)
  • GHF2210 (UnipartNummer)
ECB2
Weight: g
Bullet Contactor Double

Bullet Connector Double

Connects 4 wires with the same electrical potential.
Used to spread an electrical potential to several components like head lamp, marker lamps, dim beam, etc.
This item is known under the following partnumbers:
  • RTC603A (MGA, MGB, TR-all, Morris, Mini, and all BL-derivates)
  • GHF2211 (UnipartNummer)
EBC3
Weight: g
Bullet Connector 3
Bullet Contactor Dreifach

Bullet Connector triple

Connects 6 wires with the same electrical potential.
Used to spread an electrical potential to several components or collect the vehicle ground to get with one wire to the ground point.
This item is known under the following partnumbers:
  • CWB302
  • BHA4460
  • GHF2212 (UnipartNummer)
EBC4
Weight: g

Bullet Contactor quadruple

Connects 8 wires with the same electrical potential.
Used to spread an electrical potential to several components or collect the vehicle ground to get with one wire to the ground point.
EBC5
Weight: g
Bullet Contactor 5 fach

Bullet Connector 5

Connects 5 wires with seperate electrical potential.
This item connects 5 different electrical potentials and is known under the following partnumbers:
  • AAA4690 (MGA)
  • 850832 (Mini MkI, Moke) 
  • GHF2213 (UnipartNummer)
This connector is mostly used when connecting two wiring looms.
For example when connecting the main loom with the rear loom with the several rear lights (brake light, flasher indicator left/right, ..)
Even sometimes the earth connection is made via this item.